Quality table saw blades are pretty expensive, so I wanted to make sure they were stored property. I built a cabinet to fit under the outfeed table on my Unisaw, and dedicated one drawer to blade storage. I made each blade holder from 1/4″ plywood, originally Baltic Birch, but later just basic underlayment plywood.
The center piece is to support the weight of the blade, and the two magnets are just there to keep it from falling off. The holes allow for easy removal of the blade from the holder. Originally I used a piece of 5/8″ hardwood dowel for the enter pin, but changed it to a 3D printed piece on later builds.
